At Daimler in Portland, H-Posts were strategically placed at all perimeters of each floor and at each stair shaft, mechanical/electrical shaft, elevator shaft and roof top. This approach gave trades a way to protect themselves for both fall-restraint and fall-arrest. With the poured-in-place coil-insert sleeve, the H-post is anchored to new slab tops—providing fall-restraint through posts and guardrails, and anchor points for fall-arrest.
The Mortenson/Manson Joint Venture simulated and practiced extensively before embarking on a concrete support slab that would run the length of the Seattle Seawall.
Skanska’s Construction Work Plan (CWP) Helps Create Efficient, Effective and Consistent Planning For Construction Work Activities
Practice before you play using the 3P Method; Production, Preparation, Process
Sharing information about project success, innovations and challenges is an important strategy that SafeBuild Alliance contractors use to improve efficiency and safety performance. Mortenson Construction used the 3P method (Production, Preparation and Process) during pre-construction of the Seattle Seawall project and will share their successes.
Zero incidents through collaboration.
Provide support for and encourage highly collaborative and innovative cultures to achieve incident-free workplaces. More...
Stay connected with SafeBuild Alliance: